Installation Method of Electronic Throttle Accelerator

　　Electronic throttle accelerator is a good choice for some car owners who are not satisfied with slow throttle response and starting meat. Its function is to improve throttle response speed, improve vehicle starting speed, improve vehicle throttle sensitivity and reduce engine carbon deposition. Let's take a look at his installation steps.

　　The accelerator of electronic throttle accelerator manufacturer is installed as follows:

　　One

　　Before installation, the direction of plugs and sockets should be clearly compared. The outlet position of the throttle pedal port, the direction of the throttle pedal and the shape of the socket can be identified.

　　Two

　　First find the signal port behind the accelerator pedal. Most cars can be installed without removing the accelerator pedal.

　　Three

　　Pull out the original electronic throttle signal port, note: different plugs are different, first see clearly and then pull out, not brute force, while damaging the port.

　　Four

　　Connect the accelerator in series to the accelerator pedal signal port. Note: Don't insert the ports at both ends of the accelerator.

　　Five

　　Install the monitor in a fixed position to facilitate their own operation, and tie up the redundant wires.

　　Label: Electronic Accelerator Manufacturer