Product function:

　　1. Improving response speed of electronic throttle

　　2. Improving the Sensitivity of Electronic Throttle

　　3. Reducing Engine Carbon Deposit

　　4. Improving Automotive Electronic Throttle Hysteresis

　　5. Save 3%-8% of fuel for car

　　6. Performance improvement up to 40-70%.

　　7. Special vehicle, plug and play, non-destructive installation

　　Installation steps:

　　1. Find the signal port of the throttle port pedal of the original vehicle.

　　2. Pull out the throttle signal port of the original car

　　3. Connect the main engine of the automobile power lifting module to the pedal in series, and insert the corresponding ports in turn.

　　4. Set the control regulator.

　　Reminder

　　1. Before installation, it is necessary to turn off completely and wait for 3-5 minutes until the automotive circuit is completely dormant before installation.

　　2. Vehicles with one-button start-up need to open the door, remove the key from the car more than 3 meters away, until the car circuit is completely dormant before it can be installed.

　　3. For the first time, please use P1 comfort mode for the product.

　　Series parameters

　　Name: Automotive Power Lifting Module

　　Model: SD

　　Mode: P1 Comfort Mode

　　P2 Motion Model

　　P3 racing mode

　　learning model

　　Anti-theft mode

　　EC Oil Saving Model

　　AOF original vehicle mode

　　Detailed schema

　　P1: Accelerate throttle response speed, speed up fluency

　　P2: Instantaneous acceleration to improve the over-bending performance and achieve the best speed-up effect

　　P3: Super acceleration can be achieved to make the car feel like it's on the track.

　　Learning mode: can make the original vehicle and power module more coordinated

　　Anti-theft mode: can make the original car get a secret, so that the car is safer

　　EC: Optimum fuel economy for automobiles can be obtained

　　AOF: Restore original vehicle control without changing original vehicle output

　　Product principle

　　Automotive power lifting module optimizes the original signal into a new band data transmission to ECU through the module. The new voltage signal is optimized to drive the control object by torque and speed. Open the throttle in advance, let the throttle open in an instant and air enter in an instant. Considering the fuel economy and emission rationality, adjust the throttle opening range reasonably, and control the injection system to restrict the rational injection of nozzle, so as to achieve the best fuel state. By increasing the throttle air volume, oil molecules and air can be more fully burned. The speed will rise instantaneously, the speed of the car will rise, and the power will rise. Then the speed increase indicates that the fuel in the engine is more sufficient, thus reducing the carbon deposit in the engine.